Technical
Report No. 1
Introducing
Concrete Remedy DS (Deep Seal)
Top
contractors, architects, and engineers know the destructive results
when masonry and cementitious surfaces are not properly treated
and protected. Yet, property owners and maintenance personnel often
overlook or are not aware of this construction deficiency until
the structures visibly appear to crumble, deteriorate or show signs
of disintegration.
The
penetration of rain, and waterborne contaminants therein, salts,
oils, etc., along with freeze - thaw cycles, entering the pores
of the concrete are known to cause extensive damage. These pores
act like tubes or canals that carry damaging substances below the
surface (often through the entire structure), which creates major
deterioration problems to concrete structures.
When
a concrete structure is treated with Concrete Remedy
DS these types of problems can be greatly reduced or
eliminated entirely.
Technical Report
No. 2
General
Description of Concrete Remedy DS
Concrete Remedy
DS is a scientific, cost efficient, penetrating preservative
which waterproofs, seals, cures and strengthens old and new masonry
and cementitious surfaces.
Concrete Remedy
DS will outperform and outlast every other sealant on
the market.
Concrete Remedy
DS is a safe and easy to use, nontoxic, nonflammable,
odorless, clear and water soluble liquid compound.
According to the US Testing Laboratories, the interior of a piece
of concrete contains a minimum of 362 times the amount of alkali
as compared to the surface area. Therefore,
Concrete Remedy DS, which permeates into the concrete and
chemically reacts with the alkali becomes a permanent part of the
concrete. It is not just a surface coating.
Other sealers, even "penetrating sealers", are surface
treatments only and by their own chemical compositions, will react
negatively with the moisture and alkali in the concrete and soon
peel off due to aeration and deterioration. If there is foot or
vehicular traffic, most sealers on the market will wear off in weeks,
leaving the concrete unprotected.
Concrete Remedy
DS, on the other hand, uses the alkali within the concrete
and chemically bonds with and to the concrete internally. It cannot
aerate or deteriorate, thus giving the concrete a permanent, one
time only, waterproofing seal and cure.
Foreign matter such as acids, certain alkalies, oils, salts, and
other various substances can be very destructive to concrete. Contaminants
which become imbedded in the concrete cause various forms of deterioration
over time. Concrete Remedy DS will
prevent such destruction from within.
Concrete Remedy
DS reacts with the alkali in the moisture on the surface
of the voids and particulate, to form a sticky gel which is forced
by capillary (and an attraction to dampness), into the voids and
canals that exist beneath the
surface of the concrete.
Concrete Remedy DS has an affinity
for moisture, this facilitates it floating along through the voids
and canals. As it does so, it encounters more alkali rich moisture
and forms more gummy gel, coating the walls of the larger voids
and canals, completely filing smaller ones. This process repeats
itself until the concrete is permanently sealed. Yet, Concrete Remedy
DS allows the concrete to breathe.
This
process will also float any foreign matter inside those canals and
voids (oils, salts, acids, etc.) to the surface where they can be
flushed away.
Technical Report
No. 3
Why Use Concrete Remedy DS?
The
use of Concrete Remedy DS reduces
costly maintenance, repair and replacement expenses. It will permanently
waterproof and harden concrete to where it will virtually eliminates
wear due to abrasion. When all the benefits are evaluated,
Concrete Remedy DS has shown itself to be the most cost
efficient treatment available for concrete.
All
concrete should be stabilized with Concrete
Remedy DS.
SolvingConcreteProblems.com
and Concrete Remedy believe this information to be true to the
best of our knowledge. Our products are of the highest quality
and uniform within manufacturing tolerances.
Since no
direct control is exercised over product use, no warranty, expressed
or implied, is made as to the suitability of products for a
particular use or as to the effect of such use, and no liability
is assumed, directly or indirectly.
In the event
products received were defective at point of manufacture, replacement
will be made at no cost to purchaser.
Buyers and
users are encouraged to conduct their own tests prior to
application.
Please be
assured that we will go the extra mile in helping you solve
or prevent problems. We will provide thorough and detailed technical
assistance and help you at every step of the way to guarantee
that you get a permanent and cost beneficial solution.
We have
the resources and availability to help you with on site evaluations
and consultations. Or if you prefer to not use your resources
for application, we are ready and able to complete all the work
for you. In the event you want to do the actual work yourself,
we can provide on site technical assistance and guidance if
you want that level of assistance.
I will personally
make sure you get what you need.
Thank you
for visiting my site.